This product is a steel plate-reinforcing injection to distribute the weight load- Injecting is very fast as the viscosity is low, and there is no separation defect after curing as it is solvent-free.

Features

- Injection operation is very fast thanks to low viscosity; shows excellent penetrability 

   into concrete

- Even though the injection pressure is low, the putty doesn’t peel off and the injection 

   operation is fine thanks to low viscosity

- There is no separation with concrete surface thanks to excellent flexural rigidity

- It guarantees long life thanks to excellent alkali resistance, water resistance, and 

  weatherproof property

- Excellent adhesive strength 

Use

 - Weir steel plate-reinforcing injection

 - Sea-bank resin panel-reinforcing injection

 - Deck of bridge and overpass steel plate injection

Storage

- Store in a dry place at room temperature of 20℃ with the lid completely closed.

- Products whose shelf life has expired shall be discarded chemically.

- Shelf life: 4 months in summer, 6 months in winter

Instructions for handling

- Don’t eat or smoke in the workshop.

- Be careful not to let the product come in contact with skin- In case of contact with skin, 

  wash thoroughly with neutral detergent.

- If you ingest the product, induce vomiting immediately and seek medical attention.

- Let the chief stationed permanently supervise and direct the work so that there are no 

  safety accidents.

- Persons other than workers are not allowed to access the workshop.

- Stop the work in case of rain or when the temperature is below 5℃.

- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is 

  closed, so store indoors 

  or cover with plastic bag when storing outdoors to prevent water from entering.  

- The construction site is marked with a safety sign, and access is prohibited during curing.

- Do not weld or use fire around the workshop.

- Cover the remaining product after use with a lid to prevent oxidation.

- Note that the pot life is short in summer and long in winter.